Accessing The Scanner - Brother MFC-3100C Owner's Manual

Accessing the Scanner

®
Run your PaperPort software. You will see the PaperPort
your screen. The first time you use the Brother TWAIN driver, set it as the default by choosing the
Select Source, then click the PaperPort
Acquire Image by clicking the PaperPort
Scanning a Document into Your Macintosh G3, G4 or iMac
1
Place the original in the Automatic Document Feeder.
2
Adjust the following settings, if needed, in the scanner setup dialog box:
Resolution
Color Type
Brightness
Contrast
Scanning Area
3
Click Start.
When scanning is finished, the image will appear in your graphics application.
Using the Brother MFC with a New Power Macintosh
®
icon in the upper right hand corner of
®
icon. Afterward, for each original you scan choose
®
icon. The Scanner setup dialog box will appear.
® ™
G3, G4 or iMac /iBook
™
114