INSTALLATION INFORMATION
TOOLS AND PARTS
Gather the required tools and parts before
starting installation. The parts supplied are in
the washer drum.
Tools needed for connecting the water in-
let hoses
•
Pliers (that open to 1-9/16
•
Flashlight (optional)
Tools needed for installation
•
Open end wrenches 13 mm and 12 mm
•
Level
•
Wood block
•
Ruler or measuring tape
Parts supplied
A
B
D
A. U-shaped hose form
B. Water inlet hoses (2)
C. Inlet hose washers (4)
D. Beaded tie strap
INSTALLATION REQUIREMENTS
˝ [39.5 mm])
C
Alternate parts
If You Have
You Will Need to Buy
Laundry tub or
standpipe taller
than 55" (1.4 m)
Overhead sewer
Standard 20 gal. (76 L), 30" (76.2 cm) tall
Floor drain
Siphon break, Part Number 285834;
Drain hose too
short
Water faucets
beyond reach of fill
hoses
OPTIONS
Pedestal
You have the option of purchasing pedestals
of different heights separately for this wash-
er. You may select a 11˝ (30.0 cm) pedestal.
The pedestal will add to the total height of the
washer.
Optional pedestal
Pedestal
Approximate
Height
Height with
Washer
11.8" (30.0 cm)
44.7" (113.5 cm)
2-1
Sump pump system (if not already
available)
drain tub or utility sink and sump pump
(available from local plumbing suppliers)
additional drain hose
Part Number 8318155; and connector kit,
Part Number 285835
4 ft (1.2 m) drain hose extension kit,
Part Number 285863
2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314
10 ft (3.0 m) Part Number 350008
Color
Model
Number
White
LAB0050PQ