INSTALLATION INFORMATION
TOOLS AND PARTS
Gather the required tools and parts before
starting installation. The parts supplied are in
the washer drum.
Tools needed for connecting the water in-
let hoses
•
Pliers (that open to 1-9/16˝ [39.5 mm])
•
Flashlight (optional)
Tools needed for installation
•
Open end wrenches 17 mm and 13 mm
•
Level
•
Wood block
•
Ruler or measuring tape
Parts supplied
A
B
A. U-shaped hose form
B. Water inlet hoses (2)
C. Inlet hose washers (4)
Alternate Parts
Your installation may require additional parts.
If you are interested in purchasing one of the
items listed here, call the toll-free number on
the cover or in the "Assistance or Service"
section in the "Use & Care Guide."
INSTALLATION REQUIREMENTS
D
C
E
D. Transit bolt hole plug
E. Beaded tie strap
If You Have
Laundry tub or
standpipe taller
than 96" (2.4 m)
Overhead sewer
Floor drain
Drain hose too
short
Water faucets
beyond reach of
fill hoses
OPTIONS
Pedestal
You have the option of purchasing pedestals
of different heights separately for this washer.
You may select a 10˝ (25.4 cm) or a 15.5˝
(39.4 cm) pedestal. Remember that the ped-
estal will add to the total height of the unit.
Pedestal
Approximate
Height
Height with
Washer
10" (25.4 cm)
46" (116.8 cm)
15.5" (39.4 cm)
51.5" (130.8 cm)
2-1
You Will Need to Buy
Sump pump system (if not already
available)
Standard 20 gal. (76 L), 30" (76.2 cm)
tall drain tub or utility sink and sump
pump (available from local plumbing
suppliers)
Siphon break, Part Number 285834;
additional drain hose
Part Number 8318155; and connector
kit, Part Number 2858835
4 ft (1.2 m) drain hose extension kit,
Part Number 2858863
2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314
10 ft (3.0 m) Part Number 350008
Optional pedestal
Color
White
WHP1000SQ
White
WHP1500SQ
Model
Number