Whirlpool WFC7500VW0 User Manual page 47

REMOVING THE DOOR SWITCH, DOOR LOCK ASSEMBLY
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the top cover and the console
(see page 4-2 for the procedures).
4. Remove the lower front access panel
(see step 3 on page 4-9 for the proce-
dure).
5. Open the washer door.
Bellows
Retaining Wire
AND THE BELLOWS
6.
7.
Door Switch
Assembly
Door Lock
Assembly
4-11
Using a small screwdriver or a pair of
long-nosed pliers, pull the tension spring
on the retaining wire out from around
the front of the bellows, and remove the
wire.
Retaining Wire
Tension Spring
To remove the door switch assembly:
a) Pull the bellows off the lip of the front
panel beside the door switch assem-
bly just enough to access the switch
assembly.
b) Remove the two screws from the door
switch assembly and two screws from
the door lock assembly.
Continued on the next page.
Door Switch
Assembly Screws
Door Lock
Assembly Screws