Drive Motor - Whirlpool WFC7500VW0 User Manual

Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.

DRIVE MOTOR

Refer to page 4-23 for the procedure for ac-
cessing the drive motor.
1. Unplug washer or disconnect power.
2. Disconnect the connector from the drive
motor.
3. Set the ohmmeter to the R X 1 scale.
4. Touch the ohmmeter test leads to the
following motor pins. For each measure-
ment, use the following table.
WARNING
Electrical Shock Hazard
5-8