Whirlpool WFC7500VW0 User Manual page 86

MOTOR OVERHEATS
WON'T DRAIN
MACHINE VIBRATES
INCORRECT WATER
TEMPERATURE
DISPLAY FLASHING
1. Check drive motor.
2. Unplug washer or disconnect power.
3. Check wire harness connections.
4. Check drive belt.
5. Plug in washer or reconnect power.
6. Check for obstruction between the spin basket and the outer tub.
1. Unplug washer or disconnect power.
2. Check wire harness connections.
3. Check drain pump.
4. Check drain pump motor.
5. Check that the drain hose and drain pump filter are clear of foreign objects .
6. Plug in washer or reconnect power.
7. Verify CCU operation by running a Quick Diagnostic Test or any cycle.
1. Remove shipping system.
2. Check installation.
3. Check leveling feet.
1. Check that the inlet hoses are connected properly.
2. Unplug washer or disconnect power.
3. Check water temperature sensor for an abnormal condition. See the Water Temperature Sensor section, page 10.
4. Plug in washer or reconnect power.
5. Verify CCU operation by running a Diagnostic Test or any cycle.
See Failure/Error Display Codes.
6-14