Engine; Removing The Engine - KTM 2011 690 SMC EU Repair Manual

16

ENGINE

16.1

Removing the engine

Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
–
Disconnect the battery. (
–
Raise the motorcycle with the work stand. (
–
Take off the side cover. (
–
Remove the air filter box. (
–
Remove the manifold. (
–
Drain the coolant. (
Main work
–
Loosen the spring-loaded band-type clamp
radiator hoses.
Pliers for spring band clamp (60029057100) (
300211-10
–
Remove screws
300212-10
–
Remove screws
–
Take off the engine sprocket cover.
–
Remove screw
–
Take off the shift lever.
300213-10
–
Have an assistant operate the rear brake.
–
Bend up the lock washer.
–
Remove the nut of the engine sprocket with the lock washer.
–
Remove screws
300214-10
–
Remove nut
–
Pull out the wheel spindle only far enough to allow the rear wheel to be pushed for-
ward.
–
Push the rear wheel forward as far as possible and take the chain off the rear
sprocket.
Info
The rear wheel must be fully removed.
300215-10
p. 59)
p. 79)
p. 60)
p. 56)
p. 52)
p. 161)
.
2
.
3
.
4
.
5
. Remove the chain adjuster.
6
p. 11)
using the special tool. Detach the
1
p. 212)
100