Installing Valve Cover; Removing The Engine From The Engine Assembly Stand - KTM 2011 690 SMC EU Repair Manual

16 ENGINE

16.5.34 Installing valve cover

16.5.35 Removing the engine from the engine assembly stand

–
Put the valve cover in place with the seal. Mount and tighten screws
Guideline
Screw, valve cover
300003-10
–
Remove the screw
–
Remove the engine from the engine assembly stand.
Info
Have an assistant help you or use a crane.
300144-11
M6
or the nut .
1 2
159
.
1
10 Nm (7.4 lbf ft)