Hardware Overview - Ubiquiti EdgePoint S16 Quick Start Manual

EdgePoint EP-S16 Quick Start Guide
™

Hardware Overview

Bottom Panel Button
Reset
Button
Reset
2
Description
There are two methods to reset the EP-S16 to
factory defaults:
Runtime Reset (Recommended)
The EP-S16 should be running after bootup is
complete, and the power LED is white. Press
and hold the Reset button. The EP-S16 will
reboot, and the power LED becomes blue
after three seconds. Continue to hold the
Reset button for about 15 seconds until the
power LED flashes blue for two seconds.
This indicates that the EP-S16 has reset to its
factory defaults.
Power-on Reset
1. Disconnect power from the EP-S16.
2. While connecting power to the EP-S16,
hold the Reset button for about
15 seconds until the power LED flashes
blue for two seconds. This indicates that
the EP-S16 has reset to its factory defaults.