Table of Contents
Advertisement
Bottom Panel Console Port
Console
Interface
Console
Note:
Remove the protective plug from the Console port
before use.
Description
RJ45 serial console port for Command
Line Interface (CLI) management. Use an
RJ45-to-DB9, serial console cable, also known
as a rollover cable, to connect the Console
port to your computer. (If your computer does
not have a DB9 port, then you will also need
a DB9 adapter.) Then configure the following
settings as needed:
• Baud rate 115200
• Data bits 8
• Parity NONE
• Stop bits 1
• Flow control NONE
Hardware Overview
3
Hide quick links:
Advertisement
Table of Contents
