Safety Notices; Electrical Safety Information - Ubiquiti EdgePoint S16 Quick Start Manual

Hide thumbs Also See for EdgePoint S16:
Table of Contents

Advertisement

EdgePoint
EP-S16 Quick Start Guide

Safety Notices

1.
Read, follow, and keep these instructions.
2.
Heed all warnings.
3.
Only use attachments/accessories specified by the manufacturer.
WARNING:
submerged by water.
WARNING:
storm. There may be a remote risk of electric shock from
lightning.

Electrical Safety Information

1.
Compliance is required with respect to voltage, frequency, and current
requirements indicated on the manufacturer's label. Connection to a different
power source than those specified may result in improper operation, damage to
the equipment or pose a fire hazard if the limitations are not followed.
2.
There are no operator serviceable parts inside this equipment. Service should be
provided only by a qualified service technician.
3.
This equipment is provided with a detachable power cord which has an integral
safety ground wire intended for connection to a grounded safety outlet.
a. Do not substitute the power cord with one that is not the provided approved
type. Never use an adapter plug to connect to a 2-wire outlet as this will
defeat the continuity of the grounding wire.
b. The equipment requires the use of the ground wire as a part of the safety
certification, modification or misuse can provide a shock hazard that can
result in serious injury or death.
c. Contact a qualified electrician or the manufacturer if there are questions
about the installation prior to connecting the equipment.
d. Protective earthing is provided by Listed AC adapter. Building installation
shall provide appropriate short-circuit backup protection.
e. Protective bonding must be installed in accordance with local national wiring
rules and regulations.
26
Do not use this product in location that can be
Avoid using this product during an electrical

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents