Table of Contents
Advertisement
Hardware Overview
A and B designate the two 8-Port EdgeSwitch devices housed
in the rack. This may be useful for the Location setting on the
Device tab in the Configuration Interface.
Front Panel Ports
Management
USB
EdgeSwitch A
Interface
Management
Ports 1-8
USB
Reset
Back Panel
Ventilation Holes
Note:
There are additional ventilation holes on the top
and sides of the EdgeSwitch.
Ports 1-8
Reset
Description
10/100 Mbps port used to access the
EdgeSwitch Configuration Interface.
10/100/1000 Mbps ports for switching and
PoE (also available for management by
default).
Reserved for future use.
To reset to factory defaults, press and hold
the Reset button for more than 10 seconds
while the unit is already powered on.
Power
Management
USB
EdgeSwitch B
Ventilation Holes
Ports 1-8
Reset
Power
Advertisement
Table of Contents
