Table C-4. Extended At* Command Set - NETGEAR XM128 ISDN Reference Manual

Reference Guide for the Model XM128 ISDN Digital Modem
Table C-4 lists the extended AT* command set.
Table C-4. Extended AT* command set
Command Options
*Cn n=0-3
*C0 *
*C1
*C2
*C3
*Dn n=0-39
*D0 *
*Gn
*G3
*G4
*G5
*GCn n=0-1
*GC0
*GC1
*HCn=s n=0-4
*Hn n=0-39
*HS
*T
*V
*VC
C-12
Function and description
Character length, including start, stop and parity bit. See also S-register 15.3 and
15.4. For a description of Extended S-registers, refer to Table D-4 on page D-5 in
Appendix D, "Status Registers and Result Codes."
10-bit character length.
11-bit character length.
9-bit character length.
8-bit character length.
Sets default dial pointer at telephone directory location n. See also S-register 29.
For a description of Extended S-registers, refer to Table D-4 on page D-5 in
Appendix D, "Status Registers and Result Codes."
See also S35.4 and S38.0. For a description of Extended S-registers, refer to
Table D-4 on page D-5 in Appendix D, "Status Registers and Result Codes."
Security function selection. See also S-registers 36.5 to 36.7. For a description of
Extended S-registers, refer to Table D-4 on page D-5 in Appendix D, "Status
Registers and Result Codes."
Enables type 2 security, with password check.
Enables type 2 security, with password check and callback.
Enables type 2 security, with password check and callback; remote site enters the
callback number.
Callback function selection.
Disables callback function.
Enables callback function.
Assigns callback phone number, s to storage location n.
Modifies user password table at location n.
Modifies supervisory password (Default: NETGEAR).
Recalls the last CND (Caller ID) information.
Views the Password table.
Views the Callback Number table.
AT Command Set Reference