NETGEAR XM128 ISDN Reference Manual page 42

Reference Guide for the Model XM128 ISDN Digital Modem
Table 4-5. AT commands for setting protocols
Protocol
X.75
V.110 user rate - 38400 bps
V.120
PPP
For example, if the protocol you want is PPP, type the command ATB40&O2. For other X.75
or V.110 protocol options, refer to Appendix C, "AT Command Set Reference."
Assign the appropriate MSN telephone numbers, using the AT commands in
6.
Table 4-6. AT commands for setting MSN
Multiple subscriber number
X.75 telephone number
V.110 telephone number
V.120 telephone number
PPP telephone number
ISDN Data (Protocol autodetection)
PHONE 1
PHONE 2
For example, to assign an MSN number for a V.120 call, type the command AT&ZI2=5553434.
Type the AT command AT&W0Z0 to store the information into NVRAM.
7.
4-8
AT command
ATB00&O2
ATB18&O2
ATB20&O2
ATB40&O2
AT command
AT&ZI0=telephone number
AT&ZI1=telephone number
AT&ZI2=telephone number
AT&ZI3=telephone number
AT&ZI4=telephone number
AT&ZI6=telephone number
AT&ZI7=telephone number
Table 4-6.
Configuration