NETGEAR XM128 ISDN Reference Manual page 112

Reference Guide for the Model XM128 ISDN Digital Modem
Table C-3. Extended AT& command set (continued)
Command Options
&Knn
&K00
&K44
&Ln
&L0
&L1
&On
&O0
&O2
&O3
&Sn
&S0 *
&S1
&Tn
&T9
&T10
&Vn
&V0
&V1-4
&V5
&V6
&V7
C-10
Function and description
V.120/X.75 compression control. The command &K must be followed by two
digits. See also S-register 83.2. For a description of Extended S-registers,
refer to Table D-4 on page D-5 in Appendix D, "Status Registers and Result
Codes."
Disables V.42bis.
Enables V.42bis.
Analog port selection during call answering. See also S-register 84.5. For a
description of Extended S-registers, refer to Table D-4 on page D-5 in
Appendix D, "Status Registers and Result Codes."
Sets priority to analog port, PHONE 1.
Sets priority to analog port, PHONE 2.
Set default call type for conventional dialing commands. See also S-register
83.4 and 83.5.For a description of Extended S-registers, refer to Table D-4
on page D-5 in Appendix D, "Status Registers and Result Codes."
ATDs, ATDPs, and ATDTs default to make calls for analog adapter,
PHONE 2.
ATDs, ATDPs, and ATDTs default to make ISDN data calls.
ATDs, ATDPs, and ATDTs default to make calls for the analog adapter,
PHONE 1.
Data Set Ready (DSR) function selection. See also S-register 21.3. For a
description of Extended S-registers, refer to Table D-4 on page D-5 in
Appendix D, "Status Registers and Result Codes."
DSR is overridden; DSR is always on.
DSR according to CCITT (ITU-TSS). See also S-registers 41.5 and 44.4. For
a description of Extended S-registers, refer to Table D-4 on page D-5 in
Appendix D, "Status Registers and Result Codes."
Model XM128 modem testing.
Initiates ISDN loopback test.
Initiates ISDN loopback with self-test.
Views profile settings.
Views current active settings.
Views the (n-1)th user profile settings.
Views factory default settings.
Views analog adapter, PHONE 1 setting.
Views analog adapter, PHONE 2 setting.
AT Command Set Reference