NETGEAR XM128 ISDN Reference Manual page 132

Reference Guide for the Model XM128 ISDN Digital Modem
Table D-4. Extended S-registers ATSn=x (continued)
Command Bit
S119= 2
(continued)
3
4
5
S120=
S121=
S122=
S123=
S124=
S125= 1-6
7
D-18
Decimal Hexadecimal
0 * 0
4 4
0 * 0
8 8
0 * 0
16 10
0 * 0
32 20
0-255 0-FF
*0
0 *0
128 80
Function and
description
Disables point-to-multipoint
signaling DDI function.
Enables point-to-multipoint
signaling DDI function.
Inbound call ignored when no
MSN (EAZ) is matched.
Inbound call accepted using
default protocol when no MSN
(EAZ) is matched.
V.110 user rate = 19200 bps if DTE
speed is greater than 19200 bps.
V.110 user rate = 38400 bps if DTE
speed is greater than 38400 bps.
Enables normal MSN function.
Treats the number assigned by
&ZI=n... as subaddress, and
matches with the called party
subaddress for inbound call
routing.
Accumulated charging unit (MSB
byte) for B1 channel.
Accumulated charging unit (LSB
byte) for B1 channel.
Accumulated charging unit (MSB
byte) for B2 channel.
Accumulated charging unit (LSB
byte) for B2 channel.
Empties IP packet interval for PPP. +000
Units of 1 sec.
Sub-persist time interval.
S125b1-6 is in second unit.
S125b1-6 is in minute unit.
Status Registers and Result Codes
Default or
reference
&ZIn
KSxn
KSSn
KSMn