Table C-1. Basic At Command Set - NETGEAR XM128 ISDN Reference Manual

Table C-1. Basic AT command set (continued)
Command Options
Bnn
B00
B01
B04
B10
B13
B14
B15
B16
B17
B18
B19
B20
B40
B41
CEn
CE0
CE1
CH?
CI<prefix>
CLn n=0-2048
CL?
CN<prefix>
AT Command Set Reference
Reference Guide for the Model XM128 ISDN Digital Modem
Function and description
Select ISDN Teleservice. B must be followed by two digits.
See also S-registers 82 and 102. For a description of Extended S-registers,
refer to Table D-4 on page D-5 in Appendix D, "Status Registers and Result
Codes."
X.75 Transparent
X.75 T.70
BTX (Data X-J)
V.110 user rate follows DTE speed (async) or V.110 user rate determined by
in-band negotiation (sync)
V.110 user rate = 2400 bps. See also S-register 117. For a description of
Extended S-registers, refer to Table D-4 on page D-5 in Appendix D, "Status
Registers and Result Codes."
V.110 user rate = 4800 bps
V.110 user rate = 9600 bps
V.110 user rate = 14400 bps
V.110 user rate = 19200 bps
V.110 user rate = 384000 bps (sync only)
V.110 user rate = 576000 bps (sync only)
V.120
PPP async to sync conversion
SLIP async to sync conversion
Call bumping for MPPP and CCB. See also S-register 85.0. For a description
of Extended S-registers, refer to Table D-4 on page D-5 in Appendix D, "Status
Registers and Result Codes."
Disable call bumping function.
Enable call bumping function.
Display the accumulated charging unit of the last call.
Prefix number string to be added to the Calling-party-number before indicating
to the DTE when the type of number denotes international.
Maximum size of user data in a packet (number of octets).
Inquire current setting of ATCLn.
Prefix number string to be added to the calling party number before indicating
to the DTE when the type of number denotes national.
C-3