Entering Dns; Setup For Europe And The United Kingdom - NETGEAR XM128 ISDN Reference Manual

Entering DNs

You will need to enter the phone numbers given to your ISDN line. The phone numbers will be
cleared whenever the switch type is changed.
Type ATDN0=n and [Enter].
1.
Where n is the 7-digit phone number.
You should receive the following response:
OK
Type ATDN1=n [Enter].
2.
Where n is the second 7-digit phone number.
You should receive the following response:
OK
Type AT&W0Z0 and [Enter] to save the settings.
3.
You should receive the following response:
OK

Setup for Europe and the United Kingdom

To configure your Model XM128 modem for Europe and the United Kingdom, follow these steps:
Type the command AT&ZOI= and the ISDN telephone number to assign the outgoing
1.
telephone numbers.
For example, AT&ZO=5551111
Press [Enter].
2.
Type the command AT&ZOA= and the outgoing telephone number for PHONE 1.
3.
For example, AT&ZOA=5552222
Type the command AT&ZOB= and the outgoing telephone number for PHONE 2.
4.
For example, AT&ZOB=5553333
Assign a protocol using the commands in
5.
Configuration
Reference Guide for the Model XM128 ISDN Digital Modem
Table 4-5 to configure the B channel protocol.
4-7