Analyzing The Captured Data; Table 10-2. Epa Commands - NETGEAR XM128 ISDN Reference Manual

Reference Guide for the Model XM128 ISDN Digital Modem
The DTE-DCE protocols (at the R reference point according to the ISDN nomenclature) include
the AT commands/responses as well as the CAPI internal interface. The CAPI internal interface is
used with NETGEAR CAPI driver. The NETGEAR CAPI driver communicates with the
Model XM128 modem through this internal interface. It is not recommended that users get
involved in this internal interface. The AT commands/responses, on the other hand, are in a
standard user interface. An analysis of these commands and responses might prove very
informative. All messages captured by the EPA are tagged with a time stamp according to a free
running timer that starts at the beginning of data capture. The resolution of this timing information
is in 0.01 second.
The commands listed in
Table 10-2. EPA Commands
AT Command Description
ATCD n
n = 0 Disables the capture of D channel protocols
n = 1 Enables the capture of D channel protocols (default)
ATCB n n = 0 Disables the capture of B channel protocols (default)
n = 1 Enables the capture of B channel protocols
ATCC n
n = 0 Disables the capture of DTE-DCE interface protocols (default)
n = 1 Enables the capture of DTE-DCE interface protocols
The EPA starts to capture data when the command ATCT is issued. This capturing process
continues until the command ATC$ is issued. The EPA maintains 8 Kbytes RAM as a ring buffer.
In case the buffer is full, the earliest data captured is overwritten by the latest data.

Analyzing the Captured Data

To view the analyzed result, use the command ATC$. The relevant AT commands are summarized
in Table 10-3.
Table 10-3. Commands for analyzing captured data
AT Command Description
ATCT Clears buffer and starts the embedded protocol analyzer. Captures data
immediately and starts the timer.
ATC$ Invokes the interpretation function of the embedded protocol analyzer and
displays the results on the DTE screen.
10-6
Table 10-2 determine the kind of protocol data to be captured by the EPA.
Troubleshooting