HDMI connect HDMI cable:
1. HDMI signal input end
2. HDMI signal input connect device with HDMI signal
3. USB port connect computer for touch function
4. MENU OPERATION
After connected correctly and then Power on, Press "MENU" on the unit or by remote
control to show MENU
IN AV MODE
Press "</>"on the unit or "
/
" on the remote control to select item, eg.
,
and it will be highlighted; and then press +/ - of the unit or
/
to adjust the
favorite values. It shows current picture format (NTSC&PAL) below the dialog box.
BRIGHTNESS: to adjust the luminance of brightness
CONTRAST:to adjust the level of contrast
SATURATION: to adjust the level of saturation