HDMI to HDMI cable:
1. HDMI signal input end
2. HDMI signal input connect device with HDMI signal
3. USB port connect computer for touch function(Optional)
4. MENU OPERATION
After connected correctly and then Power on, Press "MENU" on the unit or by remote
control to show MENU.
IN AV MODE
Press "▲ / ▼"on the unit or "
, and it will be highlighted; and then press "+ / -"on the unit or
remote control to adjust the favorite values. It shows current picture format
(NTSC&PAL) below the dialog box.
BRIGHTNESS: to adjust the luminance of brightness
CONTRAST: to adjust the level of contrast
SATURATION: to adjust the level of saturation
to adjust the hue of image
TINT:
SHARPNESS: to adjust the level of sharpness
" on the remote control to select item, eg.
/
5
/
on the