Altering User Options; Accessing The User Function Menu - Tait t2020 User Manual

Altering User
Options
Display Settings Meaning
DTMF BUF/NOR Switches the DTMF dialing type between
CALL QUE
DIVERT
PROG SIG
PROG GRP
If you are not sure what user function menu options
are available, enter user function menu entry mode,
and scroll through the list of menu options.
Note: The menu options
PROG SIG
user programmable features. The table
above gives reference pages for these features.

Accessing the User Function Menu

1. Press the function key (
function menu entry mode. The scrolling
available indicator (
head display.
2. Use the up and down scroll keys (
to move through the list of menu options.
3. To leave user function menu entry mode, press
another mode key (function, call, status, channel
or alphanumeric).
buffered (tones sent together) and nor-
mal (tones sent as each key is pressed).
Accesses call queue entry mode. See "Call
Queuing" on page 36.
Accesses call diversion setup mode. See
"Call Diversion" on page 38.
Accesses signal programming mode. See
"Programmable Channel Signaling" on
page 40.
Accesses group programming mode. See
"Programmable Scanning and Voting
Groups" on page 42.
and allow you to access
PROG GRP
) to enter user
appears in the control
)
User Function Menu 35
,
CALL QUE DIVERT
/
,
)