Tait t2020 User Manual page 22

20 5-Tone Signaling
2. If the number displayed is the one you wish to
call, press the enter key (
The transmit indicator (
the radio may give a short beep, as the call is
transmitted.
3. To call a different number, use the keypad to
enter a new 5-tone number. Once all the digits
are entered, press the enter key (
key ( ) to send the call.
The transmit indicator (
the radio may give a short beep, as the call is
transmitted.
4. When the called party responds, proceed with
your conversation.
In the following example, you wish to make a
5-tone call to number 27587. The sequence of key-
strokes, and the corresponding characters that
appear in the control head display, are shown in the
table below.
Example: Making a 5-tone call to number 27587
Press Key Display
Reads
REGION2 Current channel
12345
2
27
275
2758
27587
27587
to send the call.
)
) appears briefly and
) appears briefly and
Meaning
Enter 5-tone dialing mode.
The last 5-tone number dialed
appears.
First digit of the number.
Second digit of the number.
Third digit of the number.
Fourth digit of the number.
Fifth digit of the number.
Call transmitted.
or the star
)