Activating Call Diversion - Tait t2020 User Manual

5-tone hardware must be installed in the radio and
call diversion must be programmed before this
option is available.

Activating Call Diversion

1. Press the function key (
function menu entry mode. The scrolling
available indicator (
head display, along with the last item viewed in
user function menu entry mode.
2. Use the up and down scroll keys (
to move through the list of menu options until
the option is displayed.
DIVERT
3. Press the enter key (
setup mode. The last selected diversion call type,
either
5-TONE
4. Use the up and down scroll keys (
to switch between the two options.
Note: If DTMF hardware has not been
installed and the radio programmed
appropriately, the DTMF call type is not
available.
5. Press the enter key (
type selected, and the last selected sequence is
displayed. If the last selected sequence is no
longer valid, the default sequence is displayed.
6. If another sequence is required, use the keypad
to enter the new diversion sequence.
7. Press the enter key (
diversion sequence and to put the radio into call
diversion mode.
) to enter user
appears in the control
)
to enter call diversion
)
or is displayed.
DTMF,
to confirm the call
)
to confirm the
)
User Function Menu 39
/ )
/ )