Emergency Cycling; Repeater Talkaround - Tait t2020 User Manual

Repeater
Talkaround
operation at any time by turning the radio off, then
on again.

Emergency Cycling

This begins after emergency mode is activated and
the emergency sequence has been transmitted. The
radio cycles between transmitting and receiving so
that any activity near the radio can be heard by the
party receiving the emergency call. Emergency
cycling is a programmed option. The radio can be
reset to normal operation at any time by turning the
radio off, then on again.
If the repeater is busy or you are out of range of the
repeater, you can communicate directly with
another radio by using repeater talkaround. While
repeater talkaround is active, all transmissions are
made on the receive frequency of the channel you
are on.
Give a long press of the channel key (
vate repeater talkaround. While repeater talkaround
is active, the channel LED flashes.
Select the required channel and proceed with your
call in the usual manner.
To turn off repeater talkaround, give a long press of
the channel key again, or change to another chan-
nel.
) to acti-
Other Features 45