Exiting Call Queue Entry Mode; Call Queue Full; Call Diversion - Tait t2020 User Manual

Call Diversion This feature enables the radio to be put into call
38 User Function Menu
( /
queue entries.
5. Press the enter key (
radio switches to the channel the call was
received on and sends the call. The entry is then
automatically removed from the call queue.
6. Press the zero key (
the call queue without returning the call.

Exiting Call Queue Entry Mode

To leave the call queue, press another mode key
(function, call, status, channel or alphanumeric). If
the last entry in the call queue has been returned or
deleted, the radio automatically exits from call
queue and reverts to the user function menu.

Call Queue Full

Whenever the queue is full, the radio continues to
receive calls, but does not resume what it was doing
prior to receiving the call. Calls are only received
on the active channel. Subsequent calls that are
received overwrite the information about the previ-
ous call.
diversion mode, where any valid incoming 5-tone
sequence causes the radio to transmit another user
defined 5-tone or DTMF sequence on the pro-
grammed call diversion channel. The sequence to
be transmitted and the call type (5-tone or DTMF)
can be entered by the user while in call diversion
setup mode.
) to move through the list of call
to return a call. The
)
) to delete an entry from