HP IBRIX X9720 Administrator's Manual page 34

snmpd has been restarted
When the StoreAll SNMP agent is configured, do not restart snmpd. If the snmpd restart command
is run on the active node, you will need to take one of the following steps:
If Phone Home was configured, reconfigure it.
If Phone Home was not configured, reconfigure the StoreAll SNMP agent.
Product type may vary
If there are any server nodes that do not have Customer Entered Serial Numbers or Customer
Entered Product Numbers entered for them, HP IRS will discover the Product Type as "HP StoreAll
Solution". If some server nodes (but not all) have Customer Entered Serial Numbers and Customer
Entered Product Numbers entered for them, HP IRS will discover the Product Type as "ProLiant".
The Customer Entered Serial Number and Customer Entered Product Number is displayed when
you run the ibrix_phonehome -l command.
Details for the Standby OA device must be entered manually
In HP SIM, you must manually update the CMS IP address and Custom Delivery ID details for the
Standby OA device.
34 Getting started