HP IBRIX X9720 Administrator's Manual page 22

1. Select Cluster Configuration in the upper Navigator and then select Phone Home in the lower
Navigator. The Phone Home Setup panel shows the current configuration.
2. Click Enable to configure the settings on the Phone Home Settings dialog box.
When entering information in this dialog box, consider the following:
You must enter the IP address of the CMS on which HP IRS is installed. All other fields
are optional.
The time required to configure Phone Home depends on the number of devices in the
cluster. The larger the cluster, the more time required to complete the configuration.
Do not enter anything in the Software Entitlement ID field. It is not currently used.
22 Getting started