Storeall 9730 Cx 1 Connections To The Sas Switches - HP IBRIX X9720 Administrator's Manual

StoreAll 9730 CX 1 connections to the SAS switches

The connections to the SAS switches are:
SAS port 1 connector on the primary I/O module (Drawer 1) to port 1 on the Bay 5 SAS
switch
SAS port 1 connector on the secondary I/O module (Drawer 1) to port 1 on the Bay 6 SAS
switch
SAS port 1 connector on the primary I/O module (Drawer 2) to port 1 on the Bay 7 SAS
switch
SAS port 1 connector on the secondary I/O module (Drawer 2) to port 1 on the Bay 8 SAS
switch
TIP: The number corresponding to the location of the 9730 CX corresponds to the port number
on the SAS switch to which the 9730 CX is connected. (The ports on the SAS switches are labeled
1 through 8, starting from the left.) For example, the 9730 CX 2 connects to port 2 on each SAS
switch. The StoreAll 9730 CX 7 connects to port 7 on each SAS switch.
162 StoreAll 9730 component and cabling diagrams