VESPA GT 200 Workshop Manual page 91

Vespa GT 125-200
Engine from vehicle
- Disconnect the battery
- Remove the helmet compartment
- Remove the side fairings
Remove the full muffler assembly.
- Remove the air cleaner housing acting on the 3
screws indicated in the picture, by removing the
clamp from the blow-by pipe and disconnecting the
bellow connection to the carburettor acting on the
clamp as indicated in the photograph
CAUTION
THIS OPERATION MUST BE CARRIED OUT WHEN THE
ENGINE IS COLD.
- Remove the air intake manifold on the transmis-
sion housing acting on the two screws indicated in
the photograph and remove the plastic clip
ENG VE - 91
Downloaded from www.Manualslib.com manuals search engine