VESPA GT 200 Workshop Manual page 56

Maintenance
The air passes through a rigid pipe connected to
the head and reaches a discharge joint in order to
supply oxygen to the unburned gases before the
catalytic converter, thus favouring an improved re-
action of the catalytic converter.
- Remove the muffler.
- Remove the right-hand side fairing
- Remove the coolant inlet and outlet couplings
from the pump cover. Then, drain the system
- Remove the upper clamp of the SAS valve con-
nection coupling to the drainage as indicated in the
photograph
MAIN - 56
Downloaded from www.Manualslib.com manuals search engine
Vespa GT 125-200