VESPA GT 200 Workshop Manual page 201

Vespa GT 125-200
Suspensions
- Remove the fifth wheel fitting and the dust guard
on the steering tube as shown in figure, using the
specific tool. Proceed giving a few taps with the
mallet.
Specific tooling
020004Y Punch for removing fifth wheels from
headstock
- Refit the fifth wheel fitting and the dust guard on
the steering tube until they stop, using the specific
tool.
Specific tooling
006029Y Punch for fitting fifth wheel seat on
steering tube
- Use the specific tool to fit the fifth wheel fitting on
the headstock as indicated in the figure
Specific tooling
020037Y Punch
- Remove the steering tube
- Remove the attachment bracket
- Use the specific tool with the part 1 and operate
the handgrip until removing temporarily the pin and
the Nadella opposite the tool thrusting direction.
- To extract the second Nadella, use the tool with
the part 2, instead of part 1, on opposite side to the
one indicated in the figure.
Specific tooling
020021Y Front suspension service tool
SUSP - 201
Downloaded from www.Manualslib.com manuals search engine