VESPA GT 200 Workshop Manual page 236

Cooling system
-Place the flywheel cover on the ring base which is part of the tool
N.B.
TO AVOID DAMAGING THE COVER SURFACE THAT SEALS THE COOLANT, USE THE RING
BASE WITH THE ACCURATELY MACHINED SURFACE FACING THE FLYWHEEL COVER.
Specific tooling
020440Y Water pump service tool
-With an appropriate socket and punch, forming part of the specific tool 020440y, extract the shaft
together with the rotor from the drive and the bearings.
COOL SYS - 236
Downloaded from www.Manualslib.com manuals search engine
Vespa GT 125-200