Configuring Network Settings; Configuring Network General Settings; Figure 22 Network General Settings - Honeywell 35 Series User Manual

CHAPTER
5
CONFIGURING NETWORK
SETTINGS

Configuring Network General Settings

This section describes how to configure a wired network connection for the camera.
Go to Setup > Network Setup > General Settings.

Figure 22 Network General Settings

Select IPv4/IPv6 for IP protocol.
When IPv4/IPv6 is enabled, by default, the network camera will listen to router
advertisements and be assigned with a link-local IPv4/IPv6 address accordingly.
Honeywell 35 Series IP Cameras User Guide
27