Setting Your Own Area Code; Activating/Deactivating Music On Hold; Setting The Base's Ip Address In The Lan - Gigaset N510 IP PRO Manual

Configuring the system settings
•

Setting your own area code

Your area code (international and local area code) must be saved on the phone before you
can transfer phone numbers (e.g., in vCards).
Some of these numbers are already preset.
¢
Ï Settings
v
Check that the (pre)set area code is correct.
¤
You can enter data in the following fields:
q
Select/change input field.
r
Navigate in the input field.
Ñ
If necessary, delete number: press the display key.
~
Enter number.
§Save§
Press the display key.
Example:
Area Codes
International Code:
00 - 4
Local Area Code:
0 - [ ]
Û
•

Activating/deactivating music on hold

Ï
¢
v
Settings
§Change§
Press to activate or deactivate the music on hold (³ = on).

Setting the base's IP address in the LAN

Prerequisite: Your base is connected to a router or a PC (
An IP address is required in order for the LAN to "recognise" your phone.
The IP address can be assigned to the phone automatically (by the router) or manually.
u
If done dynamically, the router's DHCP server automatically assigns an IP address to
the phone. The base's IP address can be changed according to router settings.
u
With manual/static assignment, you assign a static IP address to the phone. This may
be necessary depending on your network configuration (e.g., if your phone is con-
nected directly to a PC).
Please note
To assign the IP address dynamically, the DHCP server on the router must be activated.
Please also read the user manual for your router.
78
¢ ¢
Telephony Area Codes
Save
¢
Audio Settings
¢
Music on Hold
£
page 10).