Configuring The System Settings; Setting The Date/Time; Quickly Accessing Functions - Gigaset N510 IP PRO Manual

Configuring the system settings

Your Gigaset comes preconfigured. You can change the settings via the menu on a con-
nected Gigaset handset, e.g., from a Gigaset SL610 PRO, C610H, SL78H, SL400H, S79H or
S810H. The following instructions are based on a Gigaset SL610 PRO handset.
Some settings can also be carried out via the phone's Web configurator (

Setting the date/time

The date and time must be set in order to show the correct time for incoming calls, for
example.
There are two methods of setting the date and time:
u
Your base receives the date and time from a time server on the Internet, providing that
the base is connected to the Internet and synchronisation with a time server is enabled
(default setting;
u
You can also change the date and time manually via the menu on one of the registered
handsets.
Your base accepts the new time and transfers this information to the connected handsets.
Setting the date and time on the handset
If the date and time have not yet been set on the handset, the
appears.
§Set Time§
Press the display key.
Or:
¢
Ï Settings
v
¤
You can enter data in the following fields:
Date:
Enter the day, month and year as an 8-digit number via the keypad, 4Q 2Q
e.g.,
Time:
Enter the hours and minutes in 4-digit format via the keypad, QM 5
e.g.,
¤
Press the display key

Quickly accessing functions

Prerequisite: The handset used supports the individual assignment of display keys in idle
status.
¤
Press and hold the left or right display key. The list of possible key assignments is
opened.
¤
Select a function and press
£
page 106).
¢
Date/Time
for 07:15 am.
§Save§
to save the settings.
§OK§
.
Configuring the system settings
§Set Time§
for 14 January 2011.
£
page 87).
display key
75