Table of Contents
Advertisement
Safety Guide [IP8800/S6600]
■ Do not install the device in a humid or dusty environment.
• Do not install the device in a humid or dusty environment. Fire disasters or electric shock may be caused.
• Moving the device from a cold place to a warm place may form condensation on the surface or internal of the
device. If the device is operated immediately a fire or electric shock can be caused. Thus, in this case, leave
the device as it is for several hours before starting operation.
■ Do not stack the devices.
• Do not stack the devices. The device may be damaged. The device may be damaged or lose its balance and
fall or drop. As a result, personal injury may occur.
■ Do not recline on the device, or place a heavy loading on it.
• Do not ride on or cling to the device or do not put a heavy material on it. The device may be damaged. The
device may be damaged or lose its balance and fall or drop. As a result, personal injury may occur.
■ When installing the device on the rack, use brackets to support the weight of the
device.
• The rack-attaching brackets supplied with this device are used to fasten the device on the rack but not to
support the weight of the device. Use either of the following.
Model
IP8800/S6604
IP8800/S6608
The guide rail or shelf, if you use, must be the one attached to the rack and capable of supporting the weight
of the fully mounted device.
■ Use support brackets only for IP8800/S6604.
• The support brackets support only IP8800/S6604. Do not use for others. Otherwise, the equipment may fall or
drop and damage you.
■ Use support brackets with care.
• When you mount the device on a rack with support brackets, support the device flatly from both front and rear
sides while mounting the device and fastening screws. A tilted device may fall or drop and damage you and
other equipment mounted on the same rack.
• To mount the device on a rack with support brackets means weight of the device is supported only by
rack-attaching brackets and the support brackets. Make sure to fasten screws of the rack-attaching brackets
and the support brackets tightly.
xxii
CAUTION
guide rail, shelf, support brackets
guide rail, shelf
Items
Advertisement
Table of Contents
Troubleshooting
