NEC IP8800/S2400 Series Troubleshooting Manual page 30

Safety Guide [IP8800/S6600]
The label below is attached to the device.
45kg
IP8800/S6604
■ Handle the power cable with caution.
• Do not put a heavy material on the power cable or do not pull, bend, or modify the power cable. The power
cable will be damaged and fire disasters or electric shock may be caused. A heavy material may be placed as
a result of covering the cable with a floor carpet.
• Use the attached power cable or the power cable complying with the specifications. If any other cable is used,
fire disasters or electric shock may be caused. Do not use the attached power cable for other purposes. In such
a case, fire disasters or electric shock may be caused.
• If the power cable is degraded (e.g., wire cores exposed or broken), ask the service personnel for replacement.
Otherwise it can cause a fire or electric shock.
• Check to see if dust is deposited on the power plug. Insert the plug securely to the end so that shakiness will
not occur. If dust is deposited or connection is incomplete, fire disasters or electric shock may be caused.
■ Do not plug too many leads into a single outlet.
• Do not plug too many power plugs into a single outlet. Many loads on an electrical outlet may result in fire
disasters and the electric energy in use may be exceeded, the breaker may go off, and other components may
be affected.
■ Before powering off, turn off all power switches or breakers on the device.
• Multiple input power supplies are provided to the device. Before powering off, turn off all power switches (when
AC power supply is mounted) or breakers (when DC power supply is mounted) on the device. The label below
is attached to the device.
xx
64kg
IP8800/S6608