Writing To Mc; Writing File To Mc Using Operation Terminal - NEC IP8800/S2400 Series Troubleshooting Manual

5.
Collecting Failure Information
5.3

Writing to MC

The failure and maintenance information can be written to MC. Note that MC is subject to the capacity limit.
5.3.1

Writing File to MC Using Operation Terminal

When writing the system information to MC, use the operation terminal.
Figure 5-11: Writing Information to MC
Insert MC to which the information is written.
Check the size of the file to be copied (tech.log) using the ls -l command.)
> ls -l tech.log
-rw-r--r-- 1 operator
Check the free space using the show mc command.
>show mc
Date 2005/11/15 15:50:40 UTC
MC : Enabled
Manufacture ID : 00000003
16,735kB used
106,224kB free
122,959kB total
Copy the source file to MC with name "tech-1.log" by using the cp command.
> cp tech.log mc-file tech-1.log
Verify that the file has been written to MC.
> ls mc-dir
Name
tech-1.log
>
1. Free space
152
users 234803 Nov 15 15:52 tech.log
<---------- 1
Size
234803