Installation Of Manual Rotation Kit Ber0077 - Blizzard B74C Operator And Parts Manual

Installation of Manual Rotation Kit BER0077

(Figures 4-5-6-7)
NOTE: The rotation handle can be installed on
the right or left side of the three point hitch.
1. Install the chute according to the instructions
contained in the snowblower Operator's Manual,
with the four 1/16" thick spacers provided with the
BER0077 kit.
2. Figure 4: Install the rotation tube support
(item 1) on the chute base. Secure using a
1/4"NC x 3/4" bolt, a 1/4" lockwasher
1/4"NC nut (items 6-7-8). Do not tighten.
3. Figure 4: Insert a 1 5/16" plastic bushing
(item 2) in the rotation tube support (item 1),
then insert the rotation worm (item 3).
4. Figure 4: Insert the other 1 5/16" plastic bushing
(item 5) in the rotation worm support (item 4),
and then slide on the rotation worm. Secure with
two 1/4"NC x 3/4" bolts and 1/4"NC nuts (items
9-10-11). Do not tighten.
5. Figure 5: Install the bracket (item 1) on the 3
point right or left hitch using two 3/8"NC x 1 1/4"
bolts, 3/8" lockwashers and 3/8"NC nuts (items
2-3-4). Tighten securely.
OM 0410SB-A
ASSEMBLY
6. Figure 5: Install handle support bracket
7. Figure 5: Install the plastic grommet
8. Figure 5: Insert handle support (item 10)
and a
Figure 4 Figure 5
16
(item 5) on the bracket (item 1) using a
3/4''NC x 1 1/2'' bolt, 3/4''lockwasher and
3/4''NC nut (items 6-7-8). Do not tighten.
(item 9) in the handle support (item 10).
inside the handle support bracket (item 5).
Fasten loosely with a 3/8"NC x 1/2'' square
head set screw (item 11).