SHIELD
Note: Shield bearings must be greased every 8 working hours.
OM 0410SB-A
MAINTENANCE
AVOIDABLE DAMAGES
Excessive wear of shield
bearings.
Chain moving or failure.
Shield cone damaged.
Shield
tubes
damaged
(deformed and split at one
side).
POSSIBLE CAUSES
Insufficient lubrication.
Incorrect chain mounting.
Shield interfering with
implement.
Shield interfering with
implement.
Incorrect chain mounting.
Shield cone in contact with
components on the tractor
and/or implement.
Excessive angularity.
Shields in contact with
components on the tractor
and/or implement.
Shield tubes overlap too
short or no overlap at all
with extended driveline.
38
CORRECTIVE ACTIONS
Follow lubrication instructions.
Mount chain to allow
maximum angularity.
Avoid contact of the shields
with fixed parts of the machine
or tractor.
Replace shield bearings.
Avoid contact of the shields
with fixed parts of the machine
or tractor.
Mount chain to allow
maximum angularity.
Replace defective parts.
Eliminate interference
between Shield cones and any
part on the tractor and/or
implement.
Avoid excessive angle during
cornering or when lifting or
lowering the implement.
Replace damaged Shield
cones.
Eliminate interference
between Shield cones and
any part on the tractor and/or
implement.
Replace damaged tubes.
Adjust Shield tubes length
with longer tubes.