Blizzard B74C Operator And Parts Manual page 27

7. Figure 21: Insert the switch (item 1) in the
switchbox (item 2), secure with the two
nuts (items 3) provided with the switch,
and screw the rubber cap (item 4) in the
order shown on figure. Insert the plastic
cap (item 5) in the free hole of the
switchbox (if needed).
8. Figure 21: Install the switchbox at a
convenient location for easy access when
operating the snowblower. Secure using
three #10 x 1/2" self-drilling screws
(item 6). Leave a hole to install the ground
wire. Avoid placing the switch box where
wires are already installed as they could
be damaged.
9. Figure 19: Connect the ring terminal of the
ground wire (item 1) to a ground screw of
the vehicle.
10. Figure 19: Connect the fuse wire (item 3)
to the tractor switch wire using a tap
connector (item 5).
11. Figure 19: Connect the actuator double
wire (item 4) to the actuator (item 7).
12. Figure 19: Cover all wires with the loom
(item 6) and attach with tie wrap.
OM 0410SB-A
ASSEMBLY
25
Figure 21