Toyota 2016 Tacoma Owner's Manual page 96

96
2. Instrument cluster
■
Customizable items
● Language
Select to change the language on the display.
● Units
Select to change the unit of measure for fuel consumption and
temperature.
● Drive information 1 through 3
Select to select up to 2 items that will be displayed on a Drive
information screen, up to 3 Drive information screens can be set.
● Pop-up display
Select to set the following pop-up displays, which may appear in
some situations, on/off.
• Instrument panel brightness adjustment display
• Route guidance display of the navigation system-linked sys-
tem (if equipped)
• Incoming call display of the hands-free phone system
• Shift position display (vehicles with an automatic transmission)
● Accent color
Select to change the accent colors on the screen, such as the
cursor color.
● Speed limit display
Select to set the display of speed limit information stored in the
navigation system (if equipped) to on with the speed limit caution
indicator (yellow) enabled, on with the speed limit caution not
enabled, or off. If enabled, the speed limit caution indicator will
come on if the vehicle speed exceeds the displayed speed limit.
● Programming
It is possible to set up a screen desired to be displayed as the
Top Screen by pressing and holding
There are also screens that cannot be setup as the Top Screen.
● Maintenance system (U.S.A.)
Select to reset the message after the required maintenance is
performed. (P. 441)
● Default settings
Registered or changed meter settings will be deleted or returned
to their default setting.
*
: Speed limit display may not be available for some regions.
*
I n f o r ma t i o n P r o v i d e d b y :
.