Toyota 2016 Tacoma Owner's Manual page 246

246
4-5. Using the driving support systems
■
Shifting from "4L" to "4H"
 Automatic transmission
1
Stop the vehicle completely and continue to depress the brake
pedal.
2
Shift the shift lever to N.
3
Push and turn the front-wheel drive control switch to "4H".
The "4LO" indicator will go off.
If the four-wheel drive indicator flashes and the buzzer sounds, try the
above steps again.
 Manual transmission
1
Stop the vehicle or reduce your speed to less than 2 mph (3 km/h).
2
Depress and hold the clutch pedal.
3
Push and turn the front-wheel drive control switch to "4H".
The "4LO" indicator will go off.
If the four-wheel drive indicator flashes and the buzzer sounds, try the
above steps again.
■
If the four-wheel drive indicator light or the "4LO" indicator light blinks
●
Shifting from "2WD" to "4H"
• If the four-wheel drive indicator continues to blink, drive straight ahead
while accelerating or decelerating.
• If the four-wheel drive indicator continues to blink and the buzzer sounds,
stop the vehicle or reduce the vehicle speed to less than 62 mph
(100 km/h). Operate the switch again.
●
Shifting from "4H" to "2WD"
If the four-wheel drive indicator continues to blink, drive straight ahead
while accelerating or decelerating, or drive forward or backward in a short
distance.
I n f o r ma t i o n P r o v i d e d b y :