Changing engine switch modes
Modes can be changed by pressing the engine switch with brake
pedal released. (The mode changes each time the switch is pressed.)
*
1
Off
The emergency flashers can be
used.
2
ACCESSORY mode
Some electrical components such
as the audio system can be used.
"ACCESSORY" will be displayed
on the multi-information display.
3
IGNITION ON mode
All electrical components can be
used.
"IGNITION ON" will be displayed
on the multi-information display.
*
: If the shift lever is in a position
other than P when turning off the
engine, the engine switch will be
turned to ACCESSORY mode, not
to off.
When stopping the engine with the shift lever in a position other
than P
If the engine is stopped with the shift lever in a position other than P,
the engine switch will not be turned off but instead be turned to
ACCESSORY mode. Perform the following procedure to turn the
switch off:
1
Check that the parking brake is set.
2
Shift the shift lever to P.
3
Check that "Turn Power OFF" is displayed on the multi-information
display and then press the engine switch once.
4
Check that "Turn Power OFF" on the multi-information display is off.
4-2. Driving procedures
I n f o r ma t i o n P r o v i d e d b y :
191
4