Toyota 2016 Tacoma Owner's Manual page 465

Vehicles without a multi-information display

5
Vehicles without a smart key system:
Wait for a few minutes with the engine switch in the "ON" position
and then turn the engine switch to the "LOCK" position.
Vehicles with a smart key system:
Wait for a few minutes with the engine switch in IGNITION ON
mode and then turn the engine switch off.
 Vehicles with a multi-information display
5
Drive the vehicle at approximately 25 mph (40 km/h) or more for
approximately 10 minutes.
When initialization is complete, the inflation pressure of each tire
will be displayed on the multi-information display.
Initialization will take longer than approximately 10 minutes if the
vehicle is stopped for a long time, such as at traffic signals.
◆
Registering ID codes
The tire pressure warning valve and transmitter is equipped with a
unique ID code. When replacing a tire pressure warning valve and
transmitter, it is necessary to register the ID code. Have the ID code
registered by your Toyota dealer.
7-3. Do-it-yourself maintenance
I n f o r ma t i o n P r o v i d e d b y :
465
7