Toyota 2016 Tacoma Owner's Manual page 114

114
3-2. Opening, closing and locking the doors
■
Setting and canceling the functions
The automatic door locking and unlocking functions can be set or
canceled on the Entune Audio system screen (P. 592) or by fol-
lowing the procedure below.
1
Vehicles without a smart key system: Close all the doors and turn
the engine switch to the "ON" position. (Perform step 2 within
10 seconds.)
Vehicles with a smart key system: Close all the doors and turn
the engine switch to IGNITION ON mode. (Perform step 2 within
10 seconds.)
2
Shift the shift lever to P or N,
and press and hold the
driver's
(
approximately 5 seconds and
then release.
The shift lever and switch posi-
tions corresponding
desired function to be set are
shown as follows.
Use the same procedure to cancel the function.
Function
Shift position linked door lock-
ing function
Shift position
unlocking function
Speed linked door locking func-
tion
Driver's door
unlocking function
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
door lock switch
or
)
to
linked door
linked door
I n f o r ma t i o n P r o v i d e d b y :
for
the
Shift lever
position
P
N
Driver's door lock
switch position