Engine (Ignition) Switch (Vehicles With A Smart Key System) - Toyota 2016 Tacoma Owner's Manual

190
4-2. Driving procedures
Engine (ignition) switch (vehicles with a
smart key system)
Performing the following operations when carrying the elec-
tronic key on your person starts the engine or changes engine
switch modes.
Starting the engine
1
Check that the parking brake is set.
2
Check that the shift lever is in P.
3
Firmly depress the brake pedal.
and a message will be dis-
played on the multi-information dis-
play.
If it is not displayed, the engine
cannot be started.
4
Press the engine switch.
The engine will crank until it starts
or for up to 30 seconds, whichever
is less.
Continue depressing the brake
pedal until the engine is completely
started.
The engine can be started from
any engine switch mode.
Stopping the engine
1
Stop the vehicle.
2
Shift the shift lever to P.
3
Set the parking brake. (P. 202)
4
Press the engine switch.
5
Release the brake pedal and check that the display on the instru-
ment cluster is off.
I n f o r ma t i o n P r o v i d e d b y :