Toyota 2016 Tacoma Owner's Manual page 571

Lubrication system
Oil capacity
(Drain and refill—reference
2TR-FE engine
without towing
package
2GR-FKS
engine
with
package
*
: The engine oil capacity is a reference quantity to be used when changing
the engine oil. Warm up and turn off the engine, wait more than 5 minutes,
and check the oil level on the dipstick.
■
Engine oil selection
"Toyota Genuine Motor Oil" is used in your Toyota vehicle. Use Toy-
ota approved "Toyota Genuine Motor Oil" or equivalent to satisfy
the following grade and viscosity.
Oil grade: ILSAC GF-5 multigrade engine oil
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice
for good fuel economy and
good starting in cold weather.
If SAE 0W-20 is not available,
SAE 5W-20 oil may be used.
However, it must be replaced
with SAE 0W-20 at the next oil
change.
With filter
*
)
6.2 qt.
(5.9 L, 5.2 Imp.qt.)
6.1 qt.
(5.8 L, 5.1 Imp.qt.)
towing 6.2 qt.
(5.9 L, 5.2 Imp.qt.)
I n f o r ma t i o n P r o v i d e d b y :
9-1. Specifications
Without filter
5.8 qt.
(5.5 L, 4.8 Imp.qt.)
5.9 qt.
(5.6 L, 4.9 Imp.qt.)
Outside temperature
571
9