Toyota 2016 Tacoma Owner's Manual page 464

464
7-3. Do-it-yourself maintenance
■
How to initialize the tire pressure warning system
1
Vehicles without a smart key system:
Park the vehicle in a safe place and turn the engine switch to the
"LOCK" position.
Vehicles with a smart key system:
Park the vehicle in a safe place and turn the engine switch off.
Initialization cannot be performed while the vehicle is moving.
2
Adjust the tire inflation pressure to the specified cold tire inflation
pressure level. (P. 577)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
3
Vehicles without a smart key system:
Turn the engine switch to the "ON" position.
Vehicles with a smart key system:
Turn the engine switch to IGNITION ON mode.
4
Press and hold the tire pres-
sure warning reset switch
until the tire pressure warn-
ing light blinks slowly 3 times.
Vehicles with a multi-information
display: "- -" will be displayed for
inflation pressure of each tire on
the multi-information
while the tire pressure warning
system determines the position
of each tire.
When position of each tire is
determined, the inflation pres-
sure of each tire will be dis-
played on the multi-information
display.
display
I n f o r ma t i o n P r o v i d e d b y :